Common problems and solutions during the use of the pipe cutting machine

When using a metal circular saw machine to cut materials, problems such as frequent damage to the saw blade, burrs during cutting, and uneven cuts are often encountered. In addition, the main parameters of its operation, as well as the cutting speed and feed rate of the saw blade, should be noted when cutting thicker materials. Fengshun will give you a brief introduction.
Pipe cutting machines generally have two gears, fast and slow. Cutting fluid is usually emulsified oil. If there is a phenomenon of broken saw blades, attention should be paid to adjusting the cutting speed. Generally, at the beginning of cutting, the low-speed gear should be turned on first, and the high-speed gear should be turned on after the cutting parameters are adjusted. If it is difficult to remove iron chips, then we need to check whether the saw teeth of the saw blade are not ground properly. As for its main parameters and operating precautions, our machine comes with a product manual. Everyone must carefully read the product manual before using the machine.

Practice makes perfect. Specific issues such as adjusting the speed of the metal circular saw machine and the number of teeth on the saw blade should be determined based on the cutting material. So before using a metal circular saw machine, everyone should have a full understanding of their cutting materials, so that your metal circular saw machine can play a greater role!